M38 & M38A1 Willys
The following is our list of canvas and webbing items for the M38 and M38A1. We use 18 oz/square yard canvas with the correct milspec water and mildew resistant finish for tops and 14 oz/square yard for seat covers (different finish for tops and seats). Details and designs are the same as the originals, with a few improvements as noted. Hardware is black finish, sewing thread is polyester, zippers are aluminum, tie down ropes are your choice of manila or black polypropylene (if you don’t specify, we send manila).
Original Style Winter Top
Includes all reinforcements, flaps, and straps to accept side curtains and doors for a full winter enclosure; specify M38 or M38A1; we usually use early buckles (sliding jaw) on the M38 and late buckles (spring loaded) on the M38A1, but you can specify your preference; does not include side curtains or door covers.
Non-original design since it does not have fasteners and flaps for side curtain and door attachment; otherwise looks very similar to an original top and made just as strong with the same weight of canvas.
Pair; original style, can be made with the same buckles as on the winter top, will not attach to the summer top.
Pair; original style, removes to allow you to fold your door for storage, attach with flaps & turnbuttons (installed), metal door frame not included.
$329.00 per pair
Sewn On Door Covers
Pair; sewn on door covers, no fasteners, metal door frame not included.
$266.00 per pair
Set of 6 original style covers to recover your springs or foam inserts; covers 2 front seats and 1 rear seat.
$190.00 per set
Front Seat Covers
Set of 4 original style covers to recover your front seat springs or foam inserts. (no back seat).
$140.00 per set
Rear Seat Covers
Set of 2 original style covers to recover your rear seat springs or foam inserts.
$74.00 per set
Used to cover original springs, takes the place of horse hair front seat pieces/ rear seat pieces.
Front: $15.00 Rear: $18.00
Polyester padding to use over rubberized hairpad when covering original springs. Gives the padding a smoother, softer finish under the canvas cover.
Non-original design; set of 6 cushions to re-upholster your jeep if you have no springs or other padding suitable for recovering with the original style seat covers; foam padding is sewn into canvas covers; requires seat pan for front seat bottoms, otherwise only seat frames are required.
$430.00 per set
Front Seat Cushions
Set of 4 cushions for front seats only (no back seat).
Single seat cushion
Non-original design; cushions to re-upholster your jeep if you have no springs or other padding suitable for recovering with the original style seat covers; foam padding is sewn into canvas covers; requires seat pan for front seat bottoms, otherwise only seat frames are required.
Seat Installation Hardware
Enough slotted oval headed sheet metal screws to install a full set of seat covers or seat cushions; we can sell a ½ set if you don’t have a back seat. **IN STOCK**
Metal Reproduction Seat Pans
2 required per vehicle, each. **IN STOCK**
10 Piece strap kit
Setof all 10 straps for M38 or M38A1; includes windshield, axe, shovel, top bow (2), top stowage (4), and fuel can straps; again, we usually use the early style buckles for M38 and late style for M38A1, and we usually include a 2 piece fuel can strap with rivets. Please specify if you want otherwise.
* IN STOCK *
Any individual strap listed above, except the fuel can strap.
Fuel Can Strap
One or two piece strap to secure fuel can in its holder on the rear of the jeep. Rivets included.
New manufacture asphalt coated cotton welting (brown in color) for front grille to cushion hood in closed position; for M38A1 windshield bumper welting is also included; split rivets included for installation.
Seat Back Packs
Pair, non-original design but military look “backpacks” secure to back of front seat frames using same hardware as seat covers; 2 large pouches and 2 small pockets for stowing small items: maps, sunglasses, tools, manuals, engine oil, lunch, camera, etc.; also available for one side only, but specify which side since they are not the same.
Winch Spool Cover
Non-original, covers cable spool only, flat piece of canvas with 2 straps with buckles sewn on to secure.
** IN STOCK **
Non-original design for M38A1, patterned after original style M170 wheelhouse cushions, 1 may be used on each wheel well to provide seating; cushion attaches with screws & finishing washers to lip of tub (small holes in tub required).
$55.00 per cushion, canvas
$66.00 per cushion, leatherette
Non-original for these vehicles but patterned after the WWII jeep windshield cover, covers windshield in folded down position and closes with snaps; protects windshield and provides storage for small items inside.
Non-original; covers 7.00x16” military style tire on rear of jeep.
Latch striker Plates
Reproduction. Available with or without side curtain purchase. Pairs.
$25.00 per pair